DITL_209_Memory Short.txt
Items: (4 entries)
  0:
    Bounds: x1=275, y1=150, x2=340, y2=170
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=10, y1=10, x2=140, y2=150
    Type: -64
    Info: ' '
  2:
    Bounds: x1=150, y1=10, x2=360, y2=30
    Type: -120
    Info: 'You are nearly out of memory.'
  3:
    Bounds: x1=150, y1=45, x2=350, y2=145
    Type: -120
    Info: 'Save your work and Quit SoftPC as soon as possible.  You might try turning off the RAM Cache or removing some INITs or CDEVs to give more working space.'

DITL_208_Bad Floppy.txt
Items: (2 entries)
  0:
    Bounds: x1=274, y1=70, x2=334, y2=90
    Type: 4
    Info: 'Eject'
  1:
    Bounds: x1=74, y1=10, x2=339, y2=64
    Type: 8
    Info: 'This diskette is not an MS-DOS diskette.  Use AccessPC ¨ from Insignia Solutions or AFX to initialize MS-DOS diskettes.'

DITL_207_Memory Full.txt
Items: (4 entries)
  0:
    Bounds: x1=225, y1=130, x2=350, y2=150
    Type: 4
    Info: 'Return To Finder'
  1:
    Bounds: x1=10, y1=10, x2=140, y2=150
    Type: -64
    Info: ' '
  2:
    Bounds: x1=150, y1=10, x2=350, y2=26
    Type: -120
    Info: 'CanÕt Get Enough RAM To Run.'
  3:
    Bounds: x1=150, y1=30, x2=350, y2=120
    Type: -120
    Info: 'There is not enough available RAM to load SoftPC.  You might try turning off the RAM Cache, removing some INITs, CDEVs, etc.'

DITL_206_No Memory.txt
Items: (4 entries)
  0:
    Bounds: x1=220, y1=130, x2=340, y2=150
    Type: 4
    Info: 'Return to Finder'
  1:
    Bounds: x1=10, y1=10, x2=140, y2=150
    Type: -64
    Info: ' '
  2:
    Bounds: x1=150, y1=10, x2=340, y2=26
    Type: -120
    Info: 'Not Enough Available RAM!'
  3:
    Bounds: x1=150, y1=30, x2=340, y2=125
    Type: -120
    Info: 'Try turning off RAM Cache and removing some of the extra INIT and CDEV files from your System Folder, then use the Restart command in the Finder.'

DITL_205_no postscript.txt
Items: (6 entries)
  0:
    Bounds: x1=262, y1=186, x2=332, y2=206
    Type: 4
    Info: 'Cancel'
  1:
    Bounds: x1=262, y1=158, x2=332, y2=178
    Type: 4
    Info: 'Continue'
  2:
    Bounds: x1=63, y1=16, x2=277, y2=35
    Type: -120
    Info: 'CAUTION: No Postscript Printer!'
  3:
    Bounds: x1=21, y1=50, x2=330, y2=150
    Type: -120
    Info: 'Output direct to a Postscript printer has been requested and no Postscript printer is available.  This Print request should be cancelled and an available PostScript printer selected in the Chooser, or the Print Option should be reset to Epsonª FX-80.'
  4:
    Bounds: x1=21, y1=160, x2=256, y2=180
    Type: 8
    Info: 'Continue Ñ IÕll take my chances.'
  5:
    Bounds: x1=21, y1=188, x2=256, y2=208
    Type: 8
    Info: 'Cancel this print request.'

DITL_204_print pending alert.txt
Items: (6 entries)
  0:
    Bounds: x1=262, y1=89, x2=332, y2=109
    Type: 4
    Info: 'Print'
  1:
    Bounds: x1=262, y1=119, x2=332, y2=139
    Type: 4
    Info: 'Discard'
  2:
    Bounds: x1=63, y1=16, x2=283, y2=36
    Type: -120
    Info: 'CAUTION: Printouts will be lost!'
  3:
    Bounds: x1=12, y1=50, x2=336, y2=86
    Type: -120
    Info: 'One or more Printouts have been requested Ñ do you want to print them now, or discard them?'
  4:
    Bounds: x1=12, y1=91, x2=224, y2=110
    Type: -120
    Info: 'Print remaining printouts now.'
  5:
    Bounds: x1=12, y1=121, x2=206, y2=140
    Type: -120
    Info: 'Discard remaining printouts.'

DITL_203_print delete alert.txt
Items: (6 entries)
  0:
    Bounds: x1=262, y1=118, x2=332, y2=138
    Type: 4
    Info: 'Cancel'
  1:
    Bounds: x1=262, y1=89, x2=332, y2=109
    Type: 4
    Info: 'Discard'
  2:
    Bounds: x1=63, y1=16, x2=285, y2=36
    Type: -120
    Info: 'CAUTION: Printouts will be lost!'
  3:
    Bounds: x1=16, y1=50, x2=332, y2=86
    Type: -120
    Info: 'This will discard any previously requested printouts.'
  4:
    Bounds: x1=16, y1=91, x2=229, y2=110
    Type: -120
    Info: 'Discard remaining printouts.'
  5:
    Bounds: x1=17, y1=120, x2=258, y2=139
    Type: -120
    Info: 'Cancel Ñ donÕt discard printouts.'

DITL_202_quit alert.txt
Items: (6 entries)
  0:
    Bounds: x1=262, y1=119, x2=332, y2=139
    Type: 4
    Info: 'Cancel'
  1:
    Bounds: x1=262, y1=89, x2=332, y2=109
    Type: 4
    Info: 'Quit'
  2:
    Bounds: x1=63, y1=16, x2=263, y2=36
    Type: -120
    Info: 'CAUTION: Work could be lost!'
  3:
    Bounds: x1=16, y1=50, x2=332, y2=86
    Type: -120
    Info: 'Quitting SoftPC will cause any unsaved work in a PC application to be lost.'
  4:
    Bounds: x1=16, y1=91, x2=256, y2=109
    Type: -120
    Info: 'Quit Ñ no files need to be saved.'
  5:
    Bounds: x1=16, y1=121, x2=256, y2=139
    Type: -120
    Info: 'Cancel Ñ files need to be saved.'

DITL_201_change alert.txt
Items: (6 entries)
  0:
    Bounds: x1=278, y1=141, x2=348, y2=161
    Type: 4
    Info: 'Cancel'
  1:
    Bounds: x1=278, y1=112, x2=348, y2=132
    Type: 4
    Info: 'Reset'
  2:
    Bounds: x1=63, y1=17, x2=359, y2=34
    Type: -120
    Info: 'CAUTION: Change requires resetting SoftPC!'
  3:
    Bounds: x1=20, y1=50, x2=360, y2=100
    Type: -120
    Info: 'The change you have made cannot be put in force until the SoftPC has been 'reset'. This will cause any unsaved work in a PC application to be lost. '
  4:
    Bounds: x1=20, y1=114, x2=256, y2=133
    Type: -120
    Info: 'Reset Ñ no files need to be saved.'
  5:
    Bounds: x1=20, y1=143, x2=256, y2=162
    Type: -120
    Info: 'Cancel Ñ files need to be saved.'

DITL_200_reset alert.txt
Items: (6 entries)
  0:
    Bounds: x1=262, y1=119, x2=332, y2=139
    Type: 4
    Info: 'Cancel'
  1:
    Bounds: x1=262, y1=89, x2=332, y2=109
    Type: 4
    Info: 'Reset'
  2:
    Bounds: x1=63, y1=16, x2=263, y2=36
    Type: -120
    Info: 'CAUTION: Work could be lost!'
  3:
    Bounds: x1=12, y1=50, x2=332, y2=86
    Type: -120
    Info: 'Resetting the SoftPC will cause any unsaved work in a PC application to be lost.'
  4:
    Bounds: x1=12, y1=91, x2=256, y2=110
    Type: -120
    Info: 'Reset Ñ no files need to be saved.'
  5:
    Bounds: x1=12, y1=121, x2=256, y2=140
    Type: -120
    Info: 'Cancel Ñ files need to be saved.'

DITL_172_print cancel.txt
Items: (1 entries)
  0:
    Bounds: x1=13, y1=16, x2=308, y2=57
    Type: -120
    Info: 'To cancel printing hold down the  key andtype period(.).'

DITL_171_setup.txt
Items: (7 entries)
  0:
    Bounds: x1=10, y1=7, x2=42, y2=39
    Type: -96
    Info: '  '
  1:
    Bounds: x1=56, y1=15, x2=366, y2=35
    Type: -120
    Info: 'SoftPC cannot load; the settings arenÕt valid.'
  2:
    Bounds: x1=9, y1=40, x2=387, y2=87
    Type: -120
    Info: 'The following configuration settings have changed.  Please re-set them correctly, using the commands in the 'Options' and 'PC Drives' menus.'
  3:
    Bounds: x1=9, y1=89, x2=387, y2=123
    Type: -120
    Info: ''
  4:
    Bounds: x1=9, y1=126, x2=387, y2=160
    Type: -120
    Info: ''
  5:
    Bounds: x1=9, y1=163, x2=387, y2=197
    Type: -120
    Info: ''
  6:
    Bounds: x1=9, y1=200, x2=387, y2=234
    Type: -120
    Info: ''

DITL_170_error.txt
Items: (6 entries)
  0:
    Bounds: x1=250, y1=100, x2=320, y2=120
    Type: 4
    Info: 'Quit'
  1:
    Bounds: x1=250, y1=60, x2=320, y2=80
    Type: 4
    Info: 'Reset'
  2:
    Bounds: x1=250, y1=20, x2=320, y2=40
    Type: 4
    Info: 'Continue'
  3:
    Bounds: x1=10, y1=10, x2=42, y2=42
    Type: -96
    Info: '  '
  4:
    Bounds: x1=60, y1=20, x2=210, y2=40
    Type: -120
    Info: 'Unable To ProceedÉ'
  5:
    Bounds: x1=10, y1=50, x2=240, y2=130
    Type: -120
    Info: '^0^1'

DITL_161_hdisk getCfile.txt
Items: (13 entries)
  0:
    Bounds: x1=256, y1=119, x2=336, y2=137
    Type: 4
    Info: 'Select'
  1:
    Bounds: x1=427, y1=150, x2=507, y2=168
    Type: 4
    Info: 'New...'
  2:
    Bounds: x1=256, y1=145, x2=336, y2=163
    Type: 4
    Info: 'Cancel'
  3:
    Bounds: x1=246, y1=8, x2=346, y2=28
    Type: -128
    Info: ''
  4:
    Bounds: x1=256, y1=40, x2=336, y2=58
    Type: 4
    Info: 'Eject'
  5:
    Bounds: x1=256, y1=67, x2=336, y2=85
    Type: 4
    Info: 'Drive'
  6:
    Bounds: x1=12, y1=8, x2=230, y2=122
    Type: 0
    Info: ''
  7:
    Bounds: x1=229, y1=8, x2=245, y2=122
    Type: 0
    Info: ''
  8:
    Bounds: x1=253, y1=101, x2=341, y2=102
    Type: -128
    Info: ''
  9:
    Bounds: x1=500, y1=20, x2=600, y2=100
    Type: -120
    Info: ''
  10:
    Bounds: x1=427, y1=174, x2=507, y2=192
    Type: -124
    Info: 'Empty'
  11:
    Bounds: x1=12, y1=165, x2=247, y2=183
    Type: -120
    Info: 'Current Hard Disk for C:'
  12:
    Bounds: x1=12, y1=184, x2=338, y2=218
    Type: -120
    Info: ''

DITL_160_hdisk getDfile.txt
Items: (13 entries)
  0:
    Bounds: x1=259, y1=119, x2=339, y2=137
    Type: 4
    Info: 'Select'
  1:
    Bounds: x1=259, y1=171, x2=339, y2=189
    Type: 4
    Info: 'New...'
  2:
    Bounds: x1=259, y1=145, x2=339, y2=163
    Type: 4
    Info: 'Cancel'
  3:
    Bounds: x1=246, y1=8, x2=350, y2=28
    Type: -128
    Info: ''
  4:
    Bounds: x1=259, y1=40, x2=339, y2=58
    Type: 4
    Info: 'Eject'
  5:
    Bounds: x1=259, y1=67, x2=339, y2=85
    Type: 4
    Info: 'Drive'
  6:
    Bounds: x1=12, y1=8, x2=230, y2=138
    Type: 0
    Info: ''
  7:
    Bounds: x1=229, y1=8, x2=245, y2=138
    Type: 0
    Info: ''
  8:
    Bounds: x1=253, y1=101, x2=341, y2=102
    Type: -128
    Info: ''
  9:
    Bounds: x1=500, y1=20, x2=600, y2=100
    Type: -120
    Info: ''
  10:
    Bounds: x1=259, y1=198, x2=339, y2=216
    Type: 4
    Info: 'Empty'
  11:
    Bounds: x1=12, y1=165, x2=215, y2=184
    Type: -120
    Info: 'Current Hard Disk for D:'
  12:
    Bounds: x1=12, y1=184, x2=244, y2=218
    Type: -120
    Info: ''

DITL_153_ports putfile.txt
Items: (10 entries)
  0:
    Bounds: x1=218, y1=132, x2=288, y2=150
    Type: 4
    Info: 'Save'
  1:
    Bounds: x1=218, y1=158, x2=288, y2=176
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=14, y1=177, x2=197, y2=193
    Type: -120
    Info: 'Save serial output in:'
  3:
    Bounds: x1=198, y1=29, x2=302, y2=49
    Type: -128
    Info: ''
  4:
    Bounds: x1=218, y1=56, x2=288, y2=74
    Type: 4
    Info: 'Eject'
  5:
    Bounds: x1=218, y1=82, x2=288, y2=100
    Type: 4
    Info: 'Drive'
  6:
    Bounds: x1=17, y1=196, x2=194, y2=212
    Type: 16
    Info: ''
  7:
    Bounds: x1=14, y1=29, x2=197, y2=175
    Type: -128
    Info: ''
  8:
    Bounds: x1=218, y1=184, x2=288, y2=202
    Type: 4
    Info: 'None'
  9:
    Bounds: x1=209, y1=116, x2=297, y2=117
    Type: -128
    Info: ''

DITL_152_fsa putfile.txt
Items: (14 entries)
  0:
    Bounds: x1=206, y1=118, x2=300, y2=138
    Type: 4
    Info: 'Open Folder'
  1:
    Bounds: x1=206, y1=212, x2=300, y2=232
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=331, y1=32, x2=514, y2=48
    Type: -120
    Info: 'dummy prompt'
  3:
    Bounds: x1=198, y1=26, x2=302, y2=46
    Type: -128
    Info: ''
  4:
    Bounds: x1=206, y1=50, x2=300, y2=70
    Type: 4
    Info: 'Eject'
  5:
    Bounds: x1=206, y1=77, x2=300, y2=97
    Type: 4
    Info: 'Drive'
  6:
    Bounds: x1=334, y1=53, x2=511, y2=69
    Type: -112
    Info: 'dummy name'
  7:
    Bounds: x1=14, y1=26, x2=193, y2=188
    Type: -128
    Info: ''
  8:
    Bounds: x1=206, y1=145, x2=300, y2=165
    Type: 4
    Info: 'Select'
  9:
    Bounds: x1=198, y1=26, x2=302, y2=46
    Type: -128
    Info: ''
  10:
    Bounds: x1=198, y1=26, x2=302, y2=46
    Type: -128
    Info: ''
  11:
    Bounds: x1=14, y1=199, x2=179, y2=234
    Type: -120
    Info: 'Current Mac volume or folder for Drive E:'
  12:
    Bounds: x1=14, y1=236, x2=304, y2=270
    Type: -120
    Info: ''
  13:
    Bounds: x1=200, y1=178, x2=306, y2=198
    Type: 4
    Info: 'Set File TypesÉ'

DITL_151_hdisk putfile.txt
Items: (19 entries)
  0:
    Bounds: x1=218, y1=132, x2=288, y2=150
    Type: 4
    Info: 'Create'
  1:
    Bounds: x1=218, y1=158, x2=288, y2=176
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=14, y1=153, x2=197, y2=169
    Type: -120
    Info: 'Create Hard Disk called:'
  3:
    Bounds: x1=198, y1=29, x2=302, y2=49
    Type: -128
    Info: ''
  4:
    Bounds: x1=218, y1=56, x2=288, y2=74
    Type: 4
    Info: 'Eject'
  5:
    Bounds: x1=218, y1=82, x2=288, y2=100
    Type: 4
    Info: 'Drive'
  6:
    Bounds: x1=17, y1=180, x2=194, y2=194
    Type: 16
    Info: ''
  7:
    Bounds: x1=15, y1=29, x2=198, y2=144
    Type: -128
    Info: ''
  8:
    Bounds: x1=14, y1=230, x2=95, y2=250
    Type: 6
    Info: ' 1 Mbyte'
  9:
    Bounds: x1=14, y1=250, x2=95, y2=270
    Type: 6
    Info: ' 2 Mbyte'
  10:
    Bounds: x1=14, y1=270, x2=95, y2=290
    Type: 6
    Info: ' 3 Mbyte'
  11:
    Bounds: x1=101, y1=230, x2=185, y2=250
    Type: 6
    Info: ' 4 Mbyte'
  12:
    Bounds: x1=101, y1=250, x2=185, y2=270
    Type: 6
    Info: ' 5 Mbyte'
  13:
    Bounds: x1=101, y1=270, x2=185, y2=290
    Type: 6
    Info: '10 Mbyte'
  14:
    Bounds: x1=196, y1=230, x2=275, y2=250
    Type: 6
    Info: '15 Mbyte'
  15:
    Bounds: x1=196, y1=250, x2=275, y2=270
    Type: 6
    Info: '20 Mbyte'
  16:
    Bounds: x1=196, y1=270, x2=275, y2=290
    Type: 6
    Info: '30 Mbyte'
  17:
    Bounds: x1=15, y1=209, x2=115, y2=225
    Type: -120
    Info: 'Hard Disk Size:'
  18:
    Bounds: x1=208, y1=115, x2=301, y2=116
    Type: -128
    Info: ''

DITL_150_hdisk getfile.txt
Items: (10 entries)
  0:
    Bounds: x1=256, y1=138, x2=336, y2=156
    Type: 4
    Info: 'Select'
  1:
    Bounds: x1=256, y1=188, x2=336, y2=206
    Type: 4
    Info: 'New...'
  2:
    Bounds: x1=256, y1=163, x2=336, y2=181
    Type: 4
    Info: 'Cancel'
  3:
    Bounds: x1=246, y1=39, x2=348, y2=59
    Type: -128
    Info: ''
  4:
    Bounds: x1=256, y1=68, x2=336, y2=86
    Type: 4
    Info: 'Eject'
  5:
    Bounds: x1=256, y1=93, x2=336, y2=111
    Type: 4
    Info: 'Drive'
  6:
    Bounds: x1=12, y1=39, x2=230, y2=220
    Type: 0
    Info: ''
  7:
    Bounds: x1=229, y1=39, x2=246, y2=220
    Type: 0
    Info: ''
  8:
    Bounds: x1=252, y1=124, x2=340, y2=125
    Type: -128
    Info: ''
  9:
    Bounds: x1=500, y1=20, x2=600, y2=100
    Type: -120
    Info: ''

DITL_135_LIM.txt
Items: (8 entries)
  0:
    Bounds: x1=290, y1=50, x2=350, y2=70
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=290, y1=90, x2=350, y2=110
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=20, y1=10, x2=300, y2=30
    Type: -120
    Info: 'Select amount of memory to use for LIM:'
  3:
    Bounds: x1=60, y1=40, x2=120, y2=60
    Type: 6
    Info: ' 0 MB'
  4:
    Bounds: x1=60, y1=70, x2=120, y2=90
    Type: 6
    Info: ' 1 MB'
  5:
    Bounds: x1=60, y1=100, x2=120, y2=120
    Type: 6
    Info: ' 2 MB'
  6:
    Bounds: x1=150, y1=40, x2=210, y2=60
    Type: 6
    Info: ' 3 MB'
  7:
    Bounds: x1=150, y1=70, x2=210, y2=90
    Type: 6
    Info: ' 4 MB'

DITL_134_video adapter.txt
Items: (6 entries)
  0:
    Bounds: x1=200, y1=70, x2=260, y2=90
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=200, y1=110, x2=260, y2=130
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=60, y1=50, x2=120, y2=70
    Type: 6
    Info: '   CGA'
  3:
    Bounds: x1=60, y1=80, x2=120, y2=100
    Type: 6
    Info: '   EGA'
  4:
    Bounds: x1=60, y1=110, x2=120, y2=130
    Type: 6
    Info: '   VGA'
  5:
    Bounds: x1=20, y1=10, x2=170, y2=30
    Type: -120
    Info: 'Select video adapter:'

DITL_133_fsa types.txt
Items: (8 entries)
  0:
    Bounds: x1=236, y1=35, x2=296, y2=55
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=236, y1=60, x2=296, y2=80
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=28, y1=30, x2=164, y2=46
    Type: 6
    Info: 'ask for file type -'
  3:
    Bounds: x1=28, y1=46, x2=164, y2=62
    Type: 6
    Info: 'always use type -'
  4:
    Bounds: x1=28, y1=62, x2=220, y2=78
    Type: 6
    Info: 'automatically select type'
  5:
    Bounds: x1=8, y1=6, x2=120, y2=27
    Type: -120
    Info: 'On file creation:'
  6:
    Bounds: x1=172, y1=38, x2=214, y2=55
    Type: 16
    Info: ''
  7:
    Bounds: x1=120, y1=6, x2=308, y2=27
    Type: -120
    Info: ''

DITL_132_floppy drives.txt
Items: (18 entries)
  0:
    Bounds: x1=163, y1=214, x2=223, y2=234
    Type: 4
    Info: 'Select'
  1:
    Bounds: x1=291, y1=214, x2=351, y2=234
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=52, y1=39, x2=114, y2=53
    Type: 6
    Info: 'Empty'
  3:
    Bounds: x1=52, y1=79, x2=142, y2=93
    Type: 6
    Info: 'Slave PC'
  4:
    Bounds: x1=52, y1=119, x2=192, y2=133
    Type: 6
    Info: 'Apple 5.25'
  5:
    Bounds: x1=215, y1=39, x2=500, y2=53
    Type: 6
    Info: 'SuperDrive'
  6:
    Bounds: x1=215, y1=79, x2=500, y2=93
    Type: 6
    Info: 'SuperDrive'
  7:
    Bounds: x1=215, y1=119, x2=500, y2=133
    Type: 6
    Info: 'SuperDrive'
  8:
    Bounds: x1=215, y1=159, x2=500, y2=173
    Type: 6
    Info: 'SuperDrive'
  9:
    Bounds: x1=10, y1=69, x2=42, y2=101
    Type: -96
    Info: ' ‚'
  10:
    Bounds: x1=10, y1=110, x2=42, y2=142
    Type: -96
    Info: ' ƒ'
  11:
    Bounds: x1=10, y1=10, x2=188, y2=26
    Type: -120
    Info: 'Select device for floppy A:'
  12:
    Bounds: x1=173, y1=30, x2=205, y2=62
    Type: -128
    Info: ''
  13:
    Bounds: x1=173, y1=70, x2=205, y2=102
    Type: -128
    Info: ''
  14:
    Bounds: x1=173, y1=110, x2=205, y2=142
    Type: -128
    Info: ''
  15:
    Bounds: x1=173, y1=150, x2=205, y2=182
    Type: -128
    Info: ''
  16:
    Bounds: x1=10, y1=30, x2=42, y2=62
    Type: -96
    Info: ' „'
  17:
    Bounds: x1=37, y1=214, x2=97, y2=234
    Type: 4
    Info: 'Eject'

DITL_131_print.txt
Items: (10 entries)
  0:
    Bounds: x1=242, y1=104, x2=307, y2=124
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=242, y1=144, x2=307, y2=164
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=8, y1=8, x2=136, y2=24
    Type: 8
    Info: 'Start Printing:'
  3:
    Bounds: x1=24, y1=32, x2=287, y2=49
    Type: 5
    Info: '30 seconds after last character sent'
  4:
    Bounds: x1=24, y1=56, x2=240, y2=72
    Type: 5
    Info: 'when I quit the PC application'
  5:
    Bounds: x1=8, y1=96, x2=208, y2=112
    Type: 8
    Info: 'PC application is installed for:'
  6:
    Bounds: x1=24, y1=120, x2=159, y2=136
    Type: 6
    Info: 'Epsonª FX-80'
  7:
    Bounds: x1=24, y1=169, x2=332, y2=186
    Type: 6
    Info: 'A Postscriptª printer (e.g. LaserWriterª)'
  8:
    Bounds: x1=37, y1=139, x2=117, y2=155
    Type: 5
    Info: 'PC codes'
  9:
    Bounds: x1=125, y1=139, x2=238, y2=155
    Type: 5
    Info: 'Codepage 850'

DITL_130_ports.txt
Items: (14 entries)
  0:
    Bounds: x1=410, y1=30, x2=480, y2=50
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=410, y1=61, x2=480, y2=81
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=20, y1=20, x2=130, y2=40
    Type: 6
    Info: 'modem port'
  3:
    Bounds: x1=20, y1=40, x2=120, y2=60
    Type: 6
    Info: 'printer port'
  4:
    Bounds: x1=20, y1=60, x2=70, y2=80
    Type: 6
    Info: 'file:'
  5:
    Bounds: x1=70, y1=62, x2=200, y2=82
    Type: 8
    Info: 'portdest'
  6:
    Bounds: x1=210, y1=20, x2=320, y2=40
    Type: 6
    Info: 'modem port'
  7:
    Bounds: x1=210, y1=40, x2=310, y2=60
    Type: 6
    Info: 'printer port'
  8:
    Bounds: x1=210, y1=60, x2=260, y2=80
    Type: 6
    Info: 'file:'
  9:
    Bounds: x1=260, y1=62, x2=390, y2=82
    Type: 8
    Info: 'portdest'
  10:
    Bounds: x1=10, y1=2, x2=190, y2=20
    Type: -120
    Info: 'Primary Serial Port (COM1:)'
  11:
    Bounds: x1=200, y1=2, x2=400, y2=20
    Type: -120
    Info: 'Secondary Serial Port (COM2:)'
  12:
    Bounds: x1=54, y1=85, x2=164, y2=105
    Type: 5
    Info: 'flow control'
  13:
    Bounds: x1=244, y1=85, x2=354, y2=105
    Type: 5
    Info: 'flow control'

DITL_129_help....txt
Items: (5 entries)
  0:
    Bounds: x1=265, y1=157, x2=335, y2=177
    Type: 4
    Info: 'Resume'
  1:
    Bounds: x1=10, y1=10, x2=42, y2=42
    Type: -96
    Info: ' €'
  2:
    Bounds: x1=50, y1=20, x2=225, y2=36
    Type: -120
    Info: 'Additional Information on '
  3:
    Bounds: x1=225, y1=20, x2=355, y2=36
    Type: -120
    Info: 'Menu Options '
  4:
    Bounds: x1=10, y1=50, x2=355, y2=150
    Type: -120
    Info: 'While this dialog box is present, selecting a menu option will provide more information on its action, rather than performing it. Click on the resume button to return to normal.'

DITL_128_About SoftPCâ€¦.txt
Items: (4 entries)
  0:
    Bounds: x1=330, y1=225, x2=400, y2=245
    Type: 4
    Info: 'Continue'
  1:
    Bounds: x1=198, y1=55, x2=403, y2=90
    Type: -120
    Info: 'Version String'
  2:
    Bounds: x1=248, y1=93, x2=403, y2=109
    Type: -120
    Info: 'Serial Number'
  3:
    Bounds: x1=5, y1=5, x2=393, y2=234
    Type: -64
    Info: ' €'